Solarwize BL10012 - 12V, 100Ah, 1,28KWh Lithium Ion Battery

Solarwize BL10012 - 12V 100Ah 12,8kwh - Lithium Battery

Great lightweight lithium battery that can be used as a drop in replacement on your ups/inverter system. These batteries are also ideal for trailers or caravans for people on the move. Standard 3Year limited manufacturer warranty on these batteries. 

Product Specification - Datasheet

Model No: BL10012

Rated Voltage: 12V

Capacity: 100Ah/1280Wh/12.KWh

Bulk Charge Voltage: 14.4V

Floating Charge Voltage: 13.6V

Cut-Off Voltage: 10.8V

Max Continuous Charge Current: 50A

Max Continuous Discharge Current: 100A

C-Rating: 1C

Weight: 16.5kg

Temperature: -10°C~55°C

Additional Display, Alarm LED, Run LED

Dimensions: 333 x 175 x 226mm

Parallel: Up to 12 units

Series: Up to 12 units

Ports: None

Cells: First Life BYD 3.2V LiFe PO4 Cells

Design Life: 5 Years

Warranty: 3 Years/2500 Cycle @ 80% DOD

Over Voltage Protection: 14.6V +/- 0.2V

Over Voltage Protection Release: 14.2V +/- 0.2V

Cell Over Voltage Protection: 3.65V +/- 0.05V

Cell Over Voltage Protection Release: 3.55V +/- 0.05V

Pack Over Voltage Protection Delay Time: 1Sec

Pack Under Voltage Protection: 9.2V +/- 0.2V

Pack Under Voltage Protection Release: 10.8V +/- 0.2V

Cell Under Voltage Protection: 2.3V +/- 0.05V

Cell Under Voltage Protection Release: 2.7V +/- 0.05V

Cell Under Voltage Protection Delay Time: 1 Sec

Shell Materieal: ABS Plastic

Nett Weight: 15.8kg

Gross Weight: 16.5 kg

Cell Brand: BYD

Cell Type: BYDC13120AH3.2VLIFEPO4

Pack Type: 4 Cells in Series

Output Voltage: 12.8V

Rated Capacity: 1280Wh

Safety Precautions
The battery module must be used in conjunction with BMS, and the mixed use of batteries from
different manufacturers is strictly prohibited .
Check the battery module voltage for damage; if there is any abnormality, please stop using it.
It is strictly forbidden to stack the whole trailer battery with fork plated during transportation and
storage, and it is forbidden to stack battery modules when installing and transporting batteries.
There are positive and negative lead terminals or sampling line lead ends, and it is strictly forbidden to
squeeze, stack and place them down.
Series & parallel matching requirements for battery modules : two identical models of the same
capacity and the same voltage can be connected in series or parallel (maximum 12 battery
modules).
Mixed insertion is strictly prohibited.
It is forbidden to use or leave the battery module near high temperature and high heat sources, away
from fire and water sources.
It is forbidden to disassemble the battery module, knock, throw or step on the battery module, and
dismantle the BMS and dismantle the yellow tamper-evident sticker without authorization.
Before installing the battery module, check whether the open circuit voltage of the battery is within
the normal range. The "positive" and "negative" signs are printed on the module, and the electrical
properties should be correctly determined. It is strictly forbidden to reverse or short-circuit the
battery.
Insulation tools and gloves should be used during installation and transportation , and metal-
containing conductors such as watches, bracelets (bracelets) and rings should be removed from the
wrist to prevent electric shock and short-circuit the positive and negative electrodes. During
installation, the battery module poles need to be insulated and protected. If the poles are close to the
battery rack and other conductors, the battery poles or battery racks need to be insulated and
protected.
The recommended transportation method is for two people to carry it at the same time. The
transportation tool is a safety rope or a load-bearing net bag. The battery box must be carried to the
site. Violent construction is strictly prohibited to damage the product.
Installation and maintenance requirements. After the battery module is installed on the wall, the
poles and plug-ins are required to achieve frontal maintenance.
Battery rack compatibility; multiple groups of parallel type batteries, battery rack installation steps,
battery module installation and cable connection, according to the different types of batteries to
choose the corresponding installation diagram, installation without battery rack (such as outdoor
integration Power cabinet) Refer to the schematic diagram of battery module installation and cable
connection in battery rack mode.
Please read this installation manual carefully before installation. If you have any questions, please
contact your supplier.